Hello I bought EVO-ALL CANBUS for my car cruise 2010 automatic the installation by THAR-GM WITHOUT DATALINK and i do DCRYPTOR of the device according to catalog and i connect the wires ( open and lock the doors , foot brake , the hand brake to BCM not to EVO - and wire Ground While Running DK-BLUE with my after market Remote. olso i wire the IGN , ACC and START wires described in the catalog. my problem is when i plug the wire Ground While Running DK-BLUE with the wire comming from the remote the RED LED on the EVO turnd on directly and the security led in the car turned on and Ignition turns On, but never Starts/Cranks . so i need to know where the problem notes ( i did not know if my THAR-GM1 is GM1 OR GM1V2 ) but when i see the wires in the RED connector there is no light blue/black wire in it . thanks
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
